[{"caption":"What is a daylight basement vs walkout basement?","columns":[{"key":"means","label":"What the label describes","source_line":"IAEA (2021), Richmond (2025), Census and UMN Extension (undated); read 9 November 2026."},{"key":"scope","label":"What to resolve before finishing","source_line":"IAEA (2021), Richmond (2025), Census and UMN Extension (undated); read 9 November 2026."}],"rows":[{"option":"full","label":"Full basement","cells":{"means":{"text":"Full describes the footprint beneath the entire building. A full basement can still contain unfinished rooms.","facts":["basement#F1","basement#C2"]},"scope":{"text":"Separate the area beneath the house from the rooms you want finished.","facts":["basement#F1","basement#C2"]}}},{"option":"partial","label":"Partial basement","cells":{"means":{"text":"Partial describes a basement beneath part of the building. The label does not say whether that area has finished living space.","facts":["basement#P1","basement#C2"]},"scope":{"text":"Identify the basement boundary before deciding which rooms and walls are in the finishing scope.","facts":["basement#P1","basement#U1"]}}},{"option":"daylight","label":"Daylight basement","cells":{"means":{"text":"In the cited Richmond definition, daylight means “a basement with windows above grade but no door to the outside”. Terminology varies; confirm the actual openings.","facts":["basement#DY1","basement#C2"]},"scope":{"text":"Record which walls have above-grade windows and whether an exterior door exists.","facts":["basement#DY1","basement#W1"]}}},{"option":"walkout","label":"Walkout basement","cells":{"means":{"text":"Richmond’s definition uses “a door that opens at grade” for walkout access. A walkout can also be full or partial because footprint and access describe separate features.","facts":["basement#W1","basement#C1","basement#F1","basement#P1"]},"scope":{"text":"Show the exterior door, outside grade and drainage route before comparing finishing proposals.","facts":["basement#W1","basement#U3"]}}}]},{"caption":"What causes basement flooding?","columns":[{"key":"means","label":"Water pathway","source_line":"UMN Extension, undated; read 9 November 2026."},{"key":"scope","label":"Planning response","source_line":"UMN Extension, undated; read 9 November 2026."}],"rows":[{"option":"runoff","label":"Roof runoff","cells":{"means":{"text":"Inadequate gutters and downspouts can leave water at the foundation. UMN calls for one downspout per 50 linear feet of roof eave.","facts":["basement#U2"]},"scope":{"text":"UMN recommends extensions that discharge at least 4 feet beyond the wall. Show the discharge route on the plan.","facts":["basement#U3"]}}},{"option":"surface-slope","label":"Surface runoff","cells":{"means":{"text":"Ground that fails to slope away from the foundation can direct rainwater toward basement walls.","facts":["basement#U5"]},"scope":{"text":"Show how surface runoff will drain away before the basement walls receive interior finishes.","facts":["basement#U5","basement#U1"]}}},{"option":"subsurface-drainage","label":"Below-ground water","cells":{"means":{"text":"Missing or nonfunctioning subsurface drainage can leave a basement unable to handle water around the foundation.","facts":["basement#U6"]},"scope":{"text":"Identify the drainage defect and proposed correction separately from wall and floor finishes.","facts":["basement#U6","basement#U1"]}}}]}]