[{"caption":"What is LVP flooring made of?","columns":[{"key":"construction","label":"Construction","source_line":"RFCI rigid-core and flexible LVT/LVP guides; read 19 November 2026. Core construction and fitting method are separate choices."},{"key":"fit","label":"Installation choice","source_line":"RFCI rigid-core and flexible LVT/LVP guides; read 19 November 2026. Core construction and fitting method are separate choices."}],"rows":[{"option":"spc","label":"SPC","cells":{"construction":{"text":"Solid polymer core; RFCI describes greater indentation resistance and dimensional stability.","facts":["R1","R3"]},"fit":{"text":"Many rigid-core products use floating click-lock fitting; the exact product’s preparation limits still apply.","facts":["R5","R6"]}}},{"option":"wpc","label":"WPC","cells":{"construction":{"text":"Expanded polymer core; RFCI highlights underfoot comfort and acoustical qualities.","facts":["R1","R2"]},"fit":{"text":"Many rigid-core products use click-lock fitting, with product-specific expansion and underlayment requirements.","facts":["R5","R6"]}}},{"option":"glue-down","label":"Flexible glue-down plank","cells":{"construction":{"text":"Flexible vinyl planks bonded directly to the subfloor.","facts":["F1"]},"fit":{"text":"Select for a directly bonded installation; Shaw’s direct-glue guide specifies adhesive and substrate preparation.","facts":["F1","S1","S3"]}}},{"option":"loose-lay","label":"Flexible loose-lay plank","cells":{"construction":{"text":"Flexible planks designed to stay flat with minimal or no adhesive.","facts":["F2"]},"fit":{"text":"Use the product’s loose-lay instructions; the category does not promise an adhesive-free installation.","facts":["F2"]}}},{"option":"flexible-click","label":"Flexible click-lock plank","cells":{"construction":{"text":"Flexible LVT/LVP fitted using a click or locking system.","facts":["F3"]},"fit":{"text":"A floating installation method; the click joint alone does not identify an SPC or WPC core.","facts":["F3","R1"]}}}]},{"caption":"Does LVP flooring need to acclimate?","columns":[{"key":"condition","label":"Named product’s conditions","source_line":"Mannington ADURA Rigid guide, 25 March 2026; Shaw direct-glue guide, revision 1 April 2022; read 19 November 2026."},{"key":"timing","label":"Timing and preparation","source_line":"Product-specific limits, not category-wide requirements; manuals read 19 November 2026."}],"rows":[{"option":"spc","label":"ADURA Rigid example","cells":{"condition":{"text":"Install near the intended occupied temperature, within 55–100°F.","facts":["M2"]},"timing":{"text":"The guide does not specifically require acclimation; flatness must be within 3/16 inch in 10 feet and 1/32 inch in 12 inches.","facts":["M1","M2","M10"]}}},{"option":"glue-down","label":"Shaw direct-glue example","cells":{"condition":{"text":"The guide calls for the permanent HVAC system before, during and after fitting.","facts":["S2"]},"timing":{"text":"Acclimate flooring and adhesive at least 48 hours; run HVAC at least 72 hours before, during and after installation.","facts":["S1","S2"]}}}]}]