For homeowners
Hardwood floor refinishing vs resurfacing?
Hardwood floor refinishing suits deep damage, while resurfacing as recoating suits dull finish (National Wood Flooring Association, read 11 November 2026). A resurfacing job can leave deep scratches behind when only the finish is renewed.
| Factor | Full refinishing | Resurfacing defined as recoating |
|---|---|---|
| Condition to address | Deep scratches, dents or other flooring damage (NWFA, read 11 November 2026). | A dull finish suitable for a maintenance coat; NWFA gives a 3–5-year interval, varying with wear (read 11 November 2026). |
| Finish worn to bare wood | NWFA recommends full sanding and refinishing when finish has worn away and wood is exposed (read 11 November 2026). | NWFA describes maintenance coating for a dull existing finish; suitability requires assessing the floor (read 11 November 2026). |
| Work included | Bona: sand to bare wood, then sealer or stain and new finish (read 11 November 2026). | Bona: deep clean, rinse and prepare, then apply a new finish coat (read 11 November 2026). |
| Timing of renewal | NWFA 2019: every few decades when damage warrants it; condition-dependent, not finish life (read 11 November 2026). | NWFA 2019: maintenance coat every 3–5 years; use and wear alter the schedule (read 11 November 2026). |
| Return-to-use estimate | Bona: ready in 2–4 days for its described process; ask for finish-specific instructions (read 11 November 2026). | Bona: ready overnight for its described process; ask for finish-specific instructions (read 11 November 2026). |
| Assessment before renewal | NWFA: wear-layer thickness, flatness and condition limit sanding opportunities (read 11 November 2026). | Cornell: identify the existing finish before choosing renewal or repairs (read 11 November 2026). |
| Care of the existing wood | NWFA: keep indoor conditions at 60–80°F and 30–50% humidity year-round to minimize moisture movement (read 11 November 2026). | Cornell: standing water can dull finish and damage wood (read 11 November 2026). |
InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.
- Describe it onceBy chat, or through your own AI assistant, and add photos.
- Post it and send itContractors bid in writing on that scope.
- Compare line by lineEvery quote is written against the same scope.
- You chooseContact details stay hidden until you pick and they confirm.
Post your job on InstaBids, and contractors can bid in writing on one written scope.
How do full refinishing and resurfacing defined as recoating compare?
A dull finish suitable for a maintenance coat; NWFA gives a 3–5-year interval, varying with wear (read 11 November 2026).
Bona: ready in 2–4 days for its described process; ask for finish-specific instructions (read 11 November 2026).
Source: Bona
NWFA: keep indoor conditions at 60–80°F and 30–50% humidity year-round to minimize moisture movement (read 11 November 2026).
What is hardwood floor resurfacing?
Hardwood floor resurfacing needs a defined scope because the term alone does not say whether wood will be sanded away. For the recoating scope compared here, Bona says, “A new coat of finish is then applied.” Full refinishing instead sands to bare wood (read 11 November 2026).
Source: Bona
For a written scope, ask bidders to list the existing finish, cleaning and preparation, remaining wear layer, individual board replacements, stain or color change, finish product, and return-to-use instructions. Bona’s estimates describe its own process; the selected finish needs its own instructions. You can include this scope checklist in your InstaBids request.
Can hardwood floors be refinished without sanding?
Hardwood floors can receive a maintenance coat without sanding to bare wood, although preparation may include light abrasion. NWFA describes “cleaning the existing floor’s finish, lightly sanding it, and applying a fresh new coat of finish.” That renews the coating rather than stripping the wood (2019 guidance, read 11 November 2026).
Source: National Wood Flooring Association
A “without sanding” description therefore needs clarification: surface preparation can differ from stripping the floor back to raw wood. Bona describes cleaning and preparation for recoating, whereas its full-refinish process sands to bare wood. Keep that preparation distinction in the request contractors will bid on.
Can hardwood floors be refinished to a different color?
Hardwood floors can change color during a full sanding and refinishing. NWFA says sanding back to raw wood is an opportunity to change the floor color, while Bona describes sealer or stain followed by new finish after bare-wood sanding. Bona estimates 2–4 days for its described process (read 11 November 2026).
Source: National Wood Flooring Association, Bona
The Bona recoating description adds a finish coat after cleaning and preparation; that description does not establish the same bare-wood color-change scope. Include the desired color change in your InstaBids job description so bids specify whether sanding and stain are included.
When should hardwood floors be refinished?
Hardwood floors warrant full refinishing when damage extends beyond a dull finish. NWFA recommends sanding when “the finish has worn away, and the bare wood is exposed.” Its guidance also names deep scratches and dents as reasons for full sanding and refinishing (2019 guidance, read 11 November 2026).
Source: National Wood Flooring Association, National Wood Flooring Association
Moisture symptoms also deserve assessment: NWFA says moisture gain can cause cupping and recommends indoor conditions of 60–80°F and 30–50% humidity year-round. Those conditions apply to the wood retained by either treatment. Describe visible cupping alongside scratches when you post the job.
Can hardwood floors be refinished?
Hardwood floors need an assessment before another sanding: wear-layer thickness, flatness and condition limit what can be removed. Cornell adds, “For burns that reach deep into the wood, individual plank or parquet boards may need to be replaced.” That repair assessment comes before choosing either renewal scope (read 11 November 2026).
Source: National Wood Flooring Association, Cornell Cooperative Extension
Cornell advises identifying the existing finish before renewal or repair. Its care guidance also warns that standing water can damage the finish and wood, and recommends winter humidification to reduce shrinkage. Ask bidders to assess those conditions and record any board replacement separately in the written scope.
| Priority | Choose |
|---|---|
| Finish has worn through to bare wood | Full refinishing |
| Maintenance renewal by adding a finish coat | Resurfacing defined as recoating |
Get written bids
Sources for the facts on this page
- National Wood Flooring Association, industry, read 11 November 2026.
- National Wood Flooring Association, industry, read 11 November 2026.
- National Wood Flooring Association, industry, read 11 November 2026.
- Bona, maker's own site, read 11 November 2026.
- Cornell Cooperative Extension, university extension, read 11 November 2026.
For your AI assistant
MCP connector · REST API · plain HTMLHand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.
- MCP connector URL
https://instabids.ai/api/agent/mcp - Agent API (OpenAPI)
https://instabids.ai/openapi.json - Start-request link
https://instabids.ai/intake?from=options-compare--hardwood-floor-refinishing-vs-resurfacing&utm_source=us&utm_medium=page&utm_campaign=options&page_type=options#job=hardwood%20floor%20renewal - Prompt for any AI, with your job
- ChatGPTOpens with the prompt
- ClaudeOpens with the prompt
- GrokOpens with the prompt
- GeminiCopies the prompt, then opens
Every page is plain HTML. Steps for every assistant: add to your assistant.