Is refinishing hardwood floors worth it?
It depends on damage and remaining wood for refinishing hardwood floors: yes for NWFA’s “deep scratches” or exposed wood, no to sanding that exposes nails or joints under HUD guidance, read 2026-11-18. Previous sanding can leave too little wood for another full refinish.
Source: HUD, read 18 November 2026.
Source: NWFA, read 18 November 2026. Updated 2026-11-18
InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.
- Describe it onceBy chat, or through your own AI assistant, and add photos.
- Post it and send itContractors bid in writing on that scope.
- Compare line by lineEvery quote is written against the same scope.
- You chooseContact details stay hidden until you pick and they confirm.
When should hardwood floors be refinished?
Hardwood floors with “deep scratches, dents” or worn-through finish may suit a full sand and refinish, according to NWFA. The association identifies exposed bare wood as another reason for the work, rather than treating every dull floor as a sanding job.
Source: NWFA, read 18 November 2026.
For hardwood floors with exposed wood, you can describe the worn finish on InstaBids and compare written refinishing bids.
Can hardwood floors be refinished without sanding?
Hardwood floors that look dull may need less work: a “maintenance coat may be the solution”, NWFA says. That process still includes light sanding of the existing finish before a fresh coat; it is different from sanding back to raw wood.
Source: NWFA, read 18 November 2026.
You can describe dull hardwood finish on InstaBids so written bids specify maintenance coating or sanding back to wood.
How many times can hardwood floors be refinished?
Hardwood floors have no single sanding count in NWFA’s guidance: “thickness of the wear layer” matters, alongside equipment, skill, flatness and condition. HUD also calls for assessing how previous sandings have reduced floor thickness before another sanding.
Source: NWFA, read 18 November 2026.
Source: HUD, read 18 November 2026.
Include previous hardwood sanding in your InstaBids job description, then compare what contractors write about the remaining wear layer.
Can you refinish hardwood floors to a lighter color?
Hardwood floor sanding back to raw wood provides an opportunity to “change the color of the floor”, NWFA says. That supports discussing a color change during refinishing; the guidance does not promise that every floor can achieve every lighter shade.
Source: NWFA, read 18 November 2026.
For a hardwood color change, you can post your desired finish on InstaBids and compare written sanding and refinishing bids.
Can all hardwood floors be refinished?
Hardwood floors cannot be treated as unlimited sanding material: HUD warns, “Too much sanding will expose floor nails” and, where present, tongue-and-groove joints. Its guide calls for inspecting reduced thickness from earlier sandings before deciding on further sanding.
Source: HUD, read 18 November 2026.
You can describe thin hardwood and exposed floor nails on InstaBids when requesting written bids for the flooring work.
Get written bids
Hardwood refinishing and sanding cost guide
Contact details stay hidden until you choose one bid and the contractor confirms the connection. The contact-detail filter can miss disguised contact details.
Sources for this decision
- HUD, Residential Rehabilitation Inspection Guide, read 18 November 2026. Attributed excerpts.
- NWFA, Refinishing Your Floors, read 18 November 2026. Attributed excerpts.
For your AI assistant
MCP connector · REST API · plain HTMLHand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.
- MCP connector URL
https://instabids.ai/api/agent/mcp - Agent API (OpenAPI)
https://instabids.ai/openapi.json - Start-request link
https://instabids.ai/intake?trade=flooring&from=worth-it-refinishing-hardwood-floors&utm_source=us&utm_medium=page&utm_campaign=worth-it&page_type=worth-it&job=refinishing+hardwood+floors - Prompt for any AI, with your job
- ChatGPTOpens with the prompt
- ClaudeOpens with the prompt
- GrokOpens with the prompt
- GeminiCopies the prompt, then opens
Every page is plain HTML. Steps for every assistant: add to your assistant.