InstaBidsInstaBids
Skip to content
InstaBids
Menu
Use your AIStart my request

What types of aluminum fence are there?

Aluminum fence suits an open boundary with pickets or a screened boundary with privacy panels (Ultra Aluminum, read 13 November 2026). Aluminum fences that look equally strong may have different supporting rail thicknesses.

InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.

  1. Describe it onceBy chat, or through your own AI assistant, and add photos.
  2. Post it and send itContractors bid in writing on that scope.
  3. Compare line by lineEvery quote is written against the same scope.
  4. You chooseContact details stay hidden until you pick and they confirm.

By .

What does aluminum fence look like?

What does aluminum fence look like?
OptionsVisible construction and choiceSpecify this detail
Flat topA straight top rail over the pickets.Ultra UAF 200 uses a 3-rail layout.
Spear topSpear pickets project above the top rail.Ultra UAS 100 uses 3 rails.
Flat top with enclosed spearsSpear detail sits between the middle and top rails.Ultra UAF 250 keeps the spear detail inside a 3-rail outline.
Staggered spear topAlternating spear heights change the upper outline.Ultra UAS 150 places staggered pickets above the top rail.
Concave spear topThe spear-picket outline curves downward.Ultra UAS 300 uses a concave formation above the top rail.
Convex spear topThe spear-picket outline curves upward.Ultra UAS 350 uses a convex formation above the top rail.
Narrow-spaced picketUAF 201 uses a 1-5/8-inch residential picket gap.Ultra UAF 201 lists 1-5/8-inch residential and 1-1/2-inch commercial spacing.
All-aluminum privacySolid all-aluminum panels provide the privacy construction.Ultra lists 6-foot-wide sections at 4, 5 or 6 feet high.
Louvered aluminum privacyAluminum louvers replace the open-picket construction.Specify the aluminum frame and louver assembly shown in Ultra’s sheet.
Aluminum-frame vinyl-infill privacyAn aluminum frame holds vinyl infill.Keep the vinyl insert specification in the order as well as the aluminum frame.

Visible construction and choice: Ultra Aluminum specification sheet, 2023; read 2026-11-09.

Specify this detail: Maker-specific descriptions, not a safety or wind rating; read 2026-11-09.

What is ornamental aluminum fence?

What is ornamental aluminum fence?
OptionsSystem detailWhat changes the specification
Residential example: Jerith Liberty / LegacyBoth use 5/8-inch square pickets with 0.050-inch walls and 2-inch square standard posts with 0.060-inch walls.Liberty / Legacy rail side walls: 0.060 / 0.082 inch; both list 0.055-inch tops. Liberty uses visible fasteners; Legacy hides them.
Commercial example: Jerith PremierPremier lists 3/4-inch square pickets.Ultra drive gates list a 16-foot commercial maximum width, versus 12 feet residential and 28 feet industrial.
Industrial example: JerithJerith Industrial lists 1-inch square pickets with 0.062-inch walls. Echelon II also lists 0.125-inch walls for Invincible only.Alloy strength and coating are separate specifications: Ultra gives 35,000 psi minimum for 6005-T5 and states its powder coat meets AAMA 2604.

System detail: Jerith product comparison, undated; read 2026-11-09.

What changes the specification: Jerith and Ultra maker-specific specifications; read 2026-11-09.

Download CSV · Download JSON

Are aluminum fences good?

Finish and exposure

Ultra states that its aluminum-fence powder coat meets AAMA 2604. That coating statement is separate from ASTM F2957’s scope for coated tubular-picket systems; neither captured statement ranks these profiles by climate or supplies an installed wind rating.

Are aluminum fences strong?

Aluminum fences can share a picket size without sharing a rail specification: Jerith Liberty and Legacy both list 5/8-inch square pickets, while their rail side walls measure 0.060 and 0.082 inch. The top profile alone does not describe those component differences.

Ultra lists a 35,000 psi minimum strength for its 6005-T5 alloy. That is a material specification, not an installed fence wind rating. Compare the named rail, post and connection system alongside the alloy before treating two designs as equivalent.

Source: Fence Specifications, read 2026-11-09

Source: Aluminum Spec Comparison, read 2026-11-09

How long does aluminum fence last?

HUD’s undated multifamily planning table assigns steel or aluminum fencing 20 years for Family housing and 25 years for Elderly housing, without distinguishing flat tops, spears or privacy panels. These grouped planning estimates are not a prediction for an individual fence or its vinyl infill; see the fence lifespan guide for the broader decision.

Source: CNA Estimated Useful Life table, read 2026-10-17

What is a black aluminum fence?

Black aluminum fence describes the finish rather than the view through it: Ultra offers Textured Black on privacy fencing and lists solid aluminum sections 6 feet wide, at 4, 5 or 6 feet high. Choose the infill and top profile separately from the color.

Source: Fence Specifications, read 2026-11-09

How to install aluminum fence on a slope?

Aluminum fence on a slope needs the selected panel’s racking allowance: Ultra lists standard racking of 0–6 inches and heavy rack of 0–36 inches. The same source says the 01 Series or short pickets affect racking, so neither range is a universal allowance for every aluminum panel.

Source: Residential fencing: racking and posts, read 2026-11-11

How to install aluminum fence posts?

Aluminum fence posts vary with the layout: Ultra lists 2-inch and 2.5-inch square residential posts, then distinguishes line posts punched on opposite sides, end posts on one side and corner posts on adjacent sides.

Source: Residential fencing: racking and posts, read 2026-11-11

Can aluminum fence be curved?

Ultra’s aluminum fence uses 6-foot preassembled sections and blank posts for angles and stairs. Those connection options help describe a curved boundary, but the captured specification gives no panel-bending allowance or minimum radius; the proposed layout still needs to identify its panel and post system.

Source: Residential fencing: racking and posts, read 2026-11-11

How to install aluminum fence panels?

Sources

InstaBids assistantAI · builds your written scope with you

What aluminum fence installation do you need done in your home? Describe it once to start your written scope.

Start from a common job
You choose who gets your number
Or send it from your own AIChatGPTClaudeGrokGeminiMore ways
InstaBids

For your AI assistant

MCP connector · REST API · plain HTML

Hand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.

  • MCP connector URLhttps://instabids.ai/api/agent/mcp
  • Agent API (OpenAPI)https://instabids.ai/openapi.json
  • Start-request linkhttps://instabids.ai/intake?trade=fence&from=options-aluminum-fence&utm_source=us&utm_medium=page&utm_campaign=options&page_type=options#job=aluminum%20fence%20installation
Open it in your assistantAdd InstaBids as a connector

Every page is plain HTML. Steps for every assistant: add to your assistant.

Start my requestUse your AI