InstaBidsInstaBids
Skip to content
InstaBids
Menu
Use your AIStart my request

What types of drain are there?

Drain choice favors swales for surface runoff and French drains for buried collection (PNNL, read 9 November 2026). Downspouts too close to the house can leave water pooling beside the foundation.

InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.

  1. Describe it onceBy chat, or through your own AI assistant, and add photos.
  2. Post it and send itContractors bid in writing on that scope.
  3. Compare line by lineEvery quote is written against the same scope.
  4. You chooseContact details stay hidden until you pick and they confirm.

By . · Facts read 9 November 2026; PNNL, UMN and EPA guidance revisited 12 November 2026.

What are the different types of house drains?

What are the different types of house drains?
OptionsWhere the water is collectedWhat changes the choice
Grassy swaleAn open planted channel slows surface runoff and lets water enter the soil.Compare the channel grade: PNNL warns of pooling below 2% and erosion above 4%; WSU advises no more than 48–72 hours of ponding.
French drainA buried perforated pipe, surrounded by rock and landscape fabric, collects water and carries it onward.Use buried collection at a wet low point; WSU describes a 0.5%–1% trench slope to facilitate flow. Identify a receiving destination rather than ending the specification at the pipe.
Channel or trench drainA long surface trough collects runoff along its length; the trench form has a grate.Specify the inlet construction and access for debris removal, rather than assuming that every use of “channel” and “trench” means the same product.
Slotted drain pipeA pipe with an opening along its top admits runoff from the surface.Use the drawing to distinguish its surface opening from the holes in a buried French-drain pipe.
Area or point drainA point inlet receives water draining toward one spot.Use a point collector where the surface leads water to that location; distinguish it from a long linear inlet.
Slot drainA narrow continuous surface opening collects water without a grate.Compare the opening with a grated trench and ask how debris can be reached for removal.
Slope drainA pipe carries water down an incline.Separate the downhill pipe route from the grading that leads water toward it.
Gutters and downspoutsGutters and downspouts collect roof runoff before it reaches the ground.UMN recommends one downspout per 50 linear feet of roof eave and extensions discharging at least 4 feet beyond the wall.
Dry wellAn underground destination lets suitable runoff soak into permeable soil.WSU recommends at least 10 feet from foundations and 75 feet from wells, septic systems and surface waters; soil suitability still matters.

Where the water is collected: PNNL, WSU Extension and two manufacturers’ terminology guides; read 2026-11-09.

What changes the choice: PNNL, WSU Extension, UMN Extension, ABT Drains and Slot Drain Systems; undated guidance unless stated; read 2026-11-09.

How long do gutters and downspouts last?

How long do gutters and downspouts last?
OptionsWhat the source actually supports
Gutter materialsHUD’s undated multifamily planning table assigns aluminum gutters/downspouts 20 years and copper 50 years in both housing columns. These are planning estimates for those materials, rather than remaining-life predictions for an existing drain.

What the source actually supports: HUD Estimated Useful Life table, undated multifamily planning estimates, rows 3.3.4.3.1–2; EPA vegetative biofilter guide, September 2004; read 2026-11-09.

Download CSV · Download JSON · Table source data

How does a swale drain work?

Surface flow and channel grade

A swale slows runoff in a planted channel so water can percolate into the soil; PNNL warns that slopes below 2% can pool and above 4% can erode.

Frozen ground and storm conditions

PNNL lists “compacted soils, large storm events, frozen ground” among factors that reduce swale effectiveness; the captured guides do not rank the complete drain set by climate type.

Receiving soil

WSU describes a dry well as a destination for runoff with little sediment or pollutants, surrounded by sufficiently permeable soil; an inlet alone does not establish that destination.

What is the difference between french drain and trench drain?

A French drain collects water through a buried perforated pipe surrounded by rock and fabric; a trench drain takes surface runoff through a grated trough. WSU recommends a trench slope between 0.5% and 1% for the French-drain assembly, a different measurement from the slope of an open swale.

A grated trench intercepts water crossing paving; a French drain collects through a buried perforated pipe. Keep the grades separate: PNNL warns that an open swale can pool below 2% and erode above 4%, while WSU gives 0.5%–1% for the buried trench. You can attach the collection and discharge route to your InstaBids request.

Source: Swales, Drains, and Site Grading for Stormwater Control, read 2026-11-09

Source: Improving Drainage, read 2026-11-09

Source: Different Types of Drainage Systems, read 2026-11-09

What is a dry well drain?

A dry well lets collected runoff soak into surrounding soil. WSU recommends sufficiently permeable soil, runoff with little sediment or pollutants, and separation of at least 10 feet from foundations and 75 feet from wells, septic systems and surface waters. Those are the guide’s siting recommendations, rather than a nationwide permit rule.

A French drain is a collector and carrier; a dry well is an infiltration destination. A buried collection pipe does not establish that the receiving soil can absorb its discharge. Keep the soil condition and siting distances together in the proposed design. You can describe both ends of the drainage route in your InstaBids job.

Source: Swales, Drains, and Site Grading for Stormwater Control, read 2026-11-09

Source: Improving Drainage, read 2026-11-09

How to maintain a swale?

Swale maintenance keeps the planted channel clear of debris and sediment. EPA’s September 2004 guidance calls for debris removal no less than twice per year, and sediment removal at 4 inches of buildup or when deposits cover vegetation. Pooling and erosion are additional signs to investigate.

WSU advises designing swales so water remains no longer than 48–72 hours. EPA describes no known life limit only for a grass swale that is properly constructed, inspected and maintained; that conditional statement does not predict the life of every drain. You can include inspection and clearing tasks in the drainage work you post on InstaBids.

Source: Swales, Drains, and Site Grading for Stormwater Control, read 2026-11-09

Source: Improving Drainage, read 2026-11-09

Source: Stormwater BMP Design Guide, Volume 2: Vegetative Biofilters, read 2026-11-09

How far should downspouts be away from the house?

Downspout extensions should discharge at least 4 feet beyond the wall in University of Minnesota Extension’s basement-moisture guidance. The same guide recommends one downspout per 50 linear feet of roof eave. Carrying roof water away from the wall matters as well as collecting it along the eaves.

Look at the receiving destination after the extension. WSU describes dry wells for relatively clean runoff where surrounding soil is sufficiently permeable; reaching the recommended wall distance alone does not establish infiltration suitability. You can add the current downspout discharge point to your InstaBids request.

Source: Improving Drainage, read 2026-11-09

Source: Moisture in Basements: Causes and Solutions, read 2026-11-09

Source: Understanding the Types of Drainage Systems, read 2026-11-09

What are the four drainage systems?

ABT groups drainage into surface, subsurface, slope, and gutter/downspout systems. These describe water pathways, rather than four components every home needs. A swale is one surface option: PNNL warns that slopes below 2% can pool and slopes above 4% can contribute to erosion.

An area drain collects at a point, a trench drain along a grated trough, and a slot drain through a narrow opening without a grate. A French drain supplies buried collection, while a dry well provides an infiltration destination. You can identify the pathway you need when comparing drainage proposals on InstaBids.

Source: Swales, Drains, and Site Grading for Stormwater Control, read 2026-11-09

Source: Improving Drainage, read 2026-11-09

Source: Understanding the Types of Drainage Systems, read 2026-11-09

Source: Different Types of Drainage Systems, read 2026-11-09

What does a french drain consist of?

Sources

InstaBids assistantAI · builds your written scope with you

What home drainage installation do you need done in your home? Describe it once to start your written scope.

Start from a common job
You choose who gets your number
Or send it from your own AIChatGPTClaudeGrokGeminiMore ways
InstaBids

For your AI assistant

MCP connector · REST API · plain HTML

Hand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.

  • MCP connector URLhttps://instabids.ai/api/agent/mcp
  • Agent API (OpenAPI)https://instabids.ai/openapi.json
  • Start-request linkhttps://instabids.ai/intake?trade=landscaper&from=options-drains&utm_source=us&utm_medium=page&utm_campaign=options&page_type=options#job=home%20drainage%20installation
Open it in your assistantAdd InstaBids as a connector

Every page is plain HTML. Steps for every assistant: add to your assistant.

Start my requestUse your AI