InstaBidsInstaBids
Skip to content
InstaBids
Menu
Use your AIStart my request

Land survey types?

A boundary land survey suits locating property lines and boundary corners (USDA NRCS, read 10 November 2026). A land survey plat does not automatically include ground contours.

InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.

  1. Describe it onceBy chat, or through your own AI assistant, and add photos.
  2. Post it and send itContractors bid in writing on that scope.
  3. Compare line by lineEvery quote is written against the same scope.
  4. You chooseContact details stay hidden until you pick and they confirm.

By . · Facts read 2026-11-10

Land survey types: choose the information you need

Land survey types: choose the information you need
OptionsWhat the deliverable coversJob purpose
Boundary / cadastralProperty lines and cornersProperty-line or corner location
TopographicGround elevations and contoursGround shape for design
Construction layoutHorizontal and vertical construction positionsPositions needed during construction
As-builtFinal constructed positions and changesDocumenting what was built
ControlReference monuments for other surveysReference framework for survey work
HydrographicWater boundaries and depthsShoreline or underwater information
RouteRoads, pipelines and other linear projectsPlanning a route
ALTA/NSPS land titleFieldwork, boundary evidence and a plat or mapTitle-related survey scope requested by the parties
Elevation certificateBuilding height relative to expected floodwaterFlood-elevation documentation

What the deliverable covers: USDA NRCS (2022), ALTA/NSPS (2026), FEMA/NFIP (undated); read 2026-11-10.

Job purpose: Primary-source scope descriptions; read 2026-11-10.

ALTA scope thresholds: precision and fieldwork reach are different

ALTA scope thresholds: precision and fieldwork reach are different
OptionsPublished threshold
Relative positional precision2 cm (0.07 feet) plus 50 parts per million; a measurement ceiling with stated exceptions, not proof of boundary correctness.
Boundary-adjacent improvementsWithin five feet of each side of boundary lines, unless access is restricted; observed improvements, not all vegetation.
Utility polesOn or within ten feet of the property, as observed during fieldwork; underground utility mapping is a separate scope question.

Published threshold: ALTA/NSPS 2026 sections 3.E.v, 5.C.ii and 5.E.iv; read 2026-11-10.

Download CSV · Download JSON

Flood documentation is a purpose, not a climate ranking

Building and flood elevation

An elevation certificate compares building height with expected local floodwater. First Floor Height is the first floor above ground; basement measurements are treated separately.

Existing survey records

Ask the local floodplain manager whether an elevation certificate is already on file before requesting a new one.

What is a land survey used for?

Boundary work locates property lines; topographic work supplies contours. USDA NRCS describes cadastral surveys as work to “establish property lines and boundary corners.” Construction surveys supply positions for building work. Choose the deliverable that answers the project question. Source: USDA NRCS, 2022 handbook; read 2026-11-10.

Source: Engineering Field Handbook, Chapter 1: Surveying, read 2026-11-10

What are the four types of surveys?

Boundary, topographic, construction and as-built surveys form a project-focused shortlist. USDA NRCS describes topographic work as establishing “ground elevation points for map contour generation.” The other scopes address property lines, construction positions and final built positions. Source: USDA NRCS, 2022 handbook; read 2026-11-10.

Source: Engineering Field Handbook, Chapter 1: Surveying, read 2026-11-10

Should I get a level 1, 2, or 3 survey?

Survey levels 1, 2 and 3 here refer to RICS Home Survey reports, which assess a property's condition after physical inspection. For a US land-survey request, specify the needed deliverable instead: property lines, ground contours or construction positions. Sources: RICS and USDA NRCS; read 2026-11-10.

Source: Engineering Field Handbook, Chapter 1: Surveying, read 2026-11-10

Source: RICS Home Surveys, read 2026-11-10

What are the three types of land surveys?

Boundary, topographic and construction surveys address property lines, ground shape and construction positions. USDA NRCS defines construction surveys as providing “horizontal and vertical positions for construction projects.” The handbook also names control, route, hydrographic and as-built scopes; the three-part shortlist is incomplete. Source: USDA NRCS, 2022 handbook; read 2026-11-10.

Source: Engineering Field Handbook, Chapter 1: Surveying, read 2026-11-10

What type of land survey is most accurate?

Land-survey accuracy depends on purpose, rather than a universal ranking of survey names. ALTA/NSPS sets relative positional precision at 2 cm (0.07 feet) plus 50 parts per million, but precision cannot replace sound boundary evidence. Ask which requirement applies to the deliverable. Sources: USDA NRCS and ALTA/NSPS 2026; read 2026-11-10.

Source: Engineering Field Handbook, Chapter 1: Surveying, read 2026-11-10

Source: Minimum Standard Detail Requirements for ALTA/NSPS Land Title Surveys, read 2026-11-10

What is a land survey plat?

A land-title survey plat or map presents fieldwork alongside supplied records. ALTA/NSPS describes it as “showing the results of the fieldwork”; selected Table A information can add vertical relief. Request the needed content explicitly instead of assuming every plat includes contours. Source: ALTA/NSPS 2026; read 2026-11-10.

Source: Minimum Standard Detail Requirements for ALTA/NSPS Land Title Surveys, read 2026-11-10

What your land-survey request should specify

Sources

InstaBids assistantAI · builds your written scope with you

What land survey do you need done in your home? Describe it once to start your written scope.

Start from a common job
You choose who gets your number
Or send it from your own AIChatGPTClaudeGrokGeminiMore ways
InstaBids

For your AI assistant

MCP connector · REST API · plain HTML

Hand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.

  • MCP connector URLhttps://instabids.ai/api/agent/mcp
  • Agent API (OpenAPI)https://instabids.ai/openapi.json
  • Start-request linkhttps://instabids.ai/intake?from=options-land-survey&utm_source=us&utm_medium=page&utm_campaign=options&page_type=options#job=land%20survey
Open it in your assistantAdd InstaBids as a connector

Every page is plain HTML. Steps for every assistant: add to your assistant.

Start my requestUse your AI