InstaBidsInstaBids
Skip to content
InstaBids
Menu
Use your AIStart my request

What types of LVP flooring are there?

LVP flooring should be SPC for dent resistance, WPC for comfort or flexible plank for glue-down fitting (Resilient Floor Covering Institute, read 19 November 2026). A floor installed over uneven concrete can show ridges through the planks.

InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.

  1. Describe it onceBy chat, or through your own AI assistant, and add photos.
  2. Post it and send itContractors bid in writing on that scope.
  3. Compare line by lineEvery quote is written against the same scope.
  4. You chooseContact details stay hidden until you pick and they confirm.

By . · Facts read 2026-11-19

What is LVP flooring made of?

What is LVP flooring made of?
OptionsConstructionInstallation choice
SPC

Use SPC in your request

Solid polymer core; RFCI describes greater indentation resistance and dimensional stability.Many rigid-core products use floating click-lock fitting; the exact product’s preparation limits still apply.
WPC

Use WPC in your request

Expanded polymer core; RFCI highlights underfoot comfort and acoustical qualities.Many rigid-core products use click-lock fitting, with product-specific expansion and underlayment requirements.
Flexible glue-down plank

Use flexible glue-down plank in your request

Flexible vinyl planks bonded directly to the subfloor.Select for a directly bonded installation; Shaw’s direct-glue guide specifies adhesive and substrate preparation.
Flexible loose-lay plank

Use flexible loose-lay plank in your request

Flexible planks designed to stay flat with minimal or no adhesive.Use the product’s loose-lay instructions; the category does not promise an adhesive-free installation.
Flexible click-lock plank

Use flexible click-lock plank in your request

Flexible LVT/LVP fitted using a click or locking system.A floating installation method; the click joint alone does not identify an SPC or WPC core.

Construction: RFCI rigid-core and flexible LVT/LVP guides; read 19 November 2026. Core construction and fitting method are separate choices.

Installation choice: RFCI rigid-core and flexible LVT/LVP guides; read 19 November 2026. Core construction and fitting method are separate choices.

Does LVP flooring need to acclimate?

Does LVP flooring need to acclimate?
OptionsNamed product’s conditionsTiming and preparation
ADURA Rigid exampleInstall near the intended occupied temperature, within 55–100°F.The guide does not specifically require acclimation; flatness must be within 3/16 inch in 10 feet and 1/32 inch in 12 inches.
Shaw direct-glue exampleThe guide calls for the permanent HVAC system before, during and after fitting.Acclimate flooring and adhesive at least 48 hours; run HVAC at least 72 hours before, during and after installation.

Named product’s conditions: Mannington ADURA Rigid guide, 25 March 2026; Shaw direct-glue guide, revision 1 April 2022; read 19 November 2026.

Timing and preparation: Product-specific limits, not category-wide requirements; manuals read 19 November 2026.

Download CSV · Download JSON · Embed table

Does LVP flooring expand and contract?

Indoor conditions govern the choice

RFCI requires the manufacturer’s expansion-space, moisture and underlayment instructions even for rigid-core floors. For ADURA Rigid specifically, the installation-temperature range is 55–100°F; that product limit is not a recommendation for all SPC floors.

Can LVP flooring be heated?

LVP can have product-specific radiant-heating limits. Mannington’s ADURA Rigid guide caps the hydronic floor surface at 85°F and the electric or mat heating system at 80°F, with additional suitability conditions. Those limits belong to that product; an SPC label alone does not establish heating compatibility.

Source: ADURA Rigid installation guide (25 March 2026), read 2026-11-19

Can LVP flooring get wet?

Rigid-core LVP can resist water without making the underlying slab acceptable for installation. RFCI describes WPC and SPC cores as water resistant. For ADURA Rigid, Mannington separately limits concrete relative humidity to 85% under ASTM F2170; core water resistance does not replace that moisture test.

Source: Rigid core: SPC and WPC construction, read 2026-11-19

Source: ADURA Rigid installation guide (25 March 2026), read 2026-11-19

Can LVP flooring be installed over concrete?

LVP installation over concrete requires the selected product’s flatness and moisture limits. ADURA Rigid specifies 3/16 inch in 10 feet and 1/32 inch in 12 inches. Its guide also calls for new slabs to be thoroughly dry, at least six weeks, and completely cured; calendar age alone is insufficient.

Source: ADURA Rigid installation guide (25 March 2026), read 2026-11-19

Can LVP flooring be glued down?

Flexible glue-down LVP is bonded directly to the subfloor. Shaw’s direct-glue guide calls for at least 48 hours of acclimation for flooring and adhesive, concrete pH between 5 and 10, and a minimum 100-pound roller after fitting. Those instructions apply to the products covered by that guide.

Source: Flexible LVT/LVP installation methods, read 2026-11-19

Source: Direct-glue residential installation guide (revision April 2022), read 2026-11-19

Does LVP flooring off gas?

FloorScore addresses LVP emissions rather than wear resistance: SCS describes tests for 35 individual VOCs under California Standard Method V1.2 in its archived October 2026 guide. That testing scope excludes phthalates; the record for the exact LVP product matters, rather than an SPC or WPC core label.

Source: FloorScore testing scope (archived 23 October 2026), read 2026-11-19

Does LVP flooring need underlayment?

Sources

InstaBids assistantAI · builds your written scope with you

What LVP flooring installation do you need done in your home? Describe it once to start your written scope.

Start from a common job
You choose who gets your number
Or send it from your own AIChatGPTClaudeGrokGeminiMore ways
InstaBids

For your AI assistant

MCP connector · REST API · plain HTML

Hand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.

  • MCP connector URLhttps://instabids.ai/api/agent/mcp
  • Agent API (OpenAPI)https://instabids.ai/openapi.json
  • Start-request linkhttps://instabids.ai/intake?from=options-lvp-flooring&utm_source=us&utm_medium=page&utm_campaign=options&page_type=options#job=LVP%20flooring%20installation
Open it in your assistantAdd InstaBids as a connector

Every page is plain HTML. Steps for every assistant: add to your assistant.

Start my requestUse your AI