For homeowners
Batt insulation vs spray foam?
Batt insulation suits open framing, while spray foam suits irregular cavities (University of Maryland Extension, Home Energy: Insulation (updated July 2026), read 9 November 2026). A batt vapor barrier in the wrong position can trap moisture.
| Factor | Batt insulation | Spray foam |
|---|---|---|
| Open framing versus irregular cavities | Accessible open framing in attics, basements and crawl spaces. | hard-to-reach areas or irregular spaces |
| Air sealing is a separate decision from R-value | DOE describes batts as "Not air-tight." List the separate air-sealing work. | DOE says both foam cell types provide a good air barrier. |
| Illustrative R-value per inch; selected product label governs | Fiberglass batts/rolls: 3.2 in the extension table; not an installed assembly rating. | Spray foam: about 6 in the extension guide, which does not distinguish cell type. |
| Vapor control | Facings retard vapor; specify faced or unfaced. | Closed-cell foam retards vapor; distinguish it from open-cell foam. |
| Installation detail to put in the scope | Fit without compression. | Open-cell foam is not a vapor retarder; identify the assembly’s vapor-control plan. |
| Service-life context, not a product ranking | HUD (2000) lists generic insulation at the named building locations as Lifetime; no batt-specific duration. | HUD (2000) generic insulation entry does not specify spray-foam duration or establish a winner. |
InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.
- Describe it onceBy chat, or through your own AI assistant, and add photos.
- Post it and send itContractors bid in writing on that scope.
- Compare line by lineEvery quote is written against the same scope.
- You chooseContact details stay hidden until you pick and they confirm.
Post your job on InstaBids, and contractors can bid in writing on one written scope.
How do batt insulation and spray foam compare?
Fiberglass batts/rolls: 3.2 in the extension table; not an installed assembly rating.
Source: University of Maryland Extension, Home Energy: Insulation (updated July 2026)
Spray foam: about 6 in the extension guide, which does not distinguish cell type.
Source: University of Maryland Extension, Home Energy: Insulation (updated July 2026)
For batts, name fiberglass or mineral wool, faced or unfaced, and the work to fit batts without compression. List separate sealing at air leaks: DOE’s 2012 guide calls batts “Not air-tight.”
Source: University of Maryland Extension, Home Energy: Insulation (updated July 2026)
Is spray foam insulation better than fiberglass?
Spray foam supplies an air barrier as well as insulation, while fiberglass batts need a separate air-sealing plan. DOE’s 2012 guide says of open-cell and closed-cell foam: “Both will provide a good air barrier.” Compare the fitted batt plus sealing work against the specified foam assembly. Sources read 9 November 2026.
Source: U.S. DOE, Energy Renovations: Insulation (May 2012), University of Maryland Extension, Home Energy: Insulation (updated July 2026)
What is the R-value of spray foam insulation?
Spray foam’s illustrative R-value is about 6 per inch in the extension guide, which does not distinguish cell type. Fiberglass batts are 3.2 per inch in its table. For tested product performance, the FTC lists ASTM C518-17, using a “Heat Flow Meter Apparatus”. Sources read 9 November 2026.
Source: University of Maryland Extension, Home Energy: Insulation (updated July 2026), Federal Trade Commission, 16 CFR 460.5(a), R-value tests
Request the selected product’s labelled R-value at the proposed thickness. The extension’s examples describe materials; they do not establish the thermal performance of your complete installed wall or roof.
Does batt insulation have a vapor barrier?
Batt insulation may be faced or unfaced. DOE’s 2012 guide states “Batt facings are vapor retarders;” and warns that facing between attic insulation layers can cause moisture and mold problems. A facing is therefore part of the moisture-control design, rather than an automatic upgrade to every batt installation. Sources read 9 November 2026.
Can you use batt insulation in attic?
Batt insulation fits accessible attic framing when installed without compression. The extension guide lists mineral wool at an illustrative R-3.1 per inch, so “batt” does not mean fiberglass alone. Identify the batt material and whether the bid covers the attic floor or the underside of the roof deck. Sources read 9 November 2026.
Source: University of Maryland Extension, Home Energy: Insulation (updated July 2026)
How long does spray foam insulation last?
HUD’s 2000 Appendix C lists insulation in foundations, roofs, ceilings, walls and floors as “Lifetime.” The entry is a generic industry estimate: it separates neither batts nor spray foam and supplies no material-specific duration or lifespan winner. Sources read 9 November 2026.
Source: HUD, Residential Rehabilitation Inspection Guide, Appendix C (2000)
Which insulation fits cold, hot-dry, and mixed climates?
DOE’s 2012 guidance distinguishes the roof assembly as well as the climate. Closed-cell foam is a vapor retarder with an advantage in cold climates requiring condensation protection. Its hot-dry roof-deck example allows fiberglass batts, while its mixed-climate discussion considers a vapor-open assembly. These are historical design examples, not current code instructions. Sources read 9 November 2026.
Source: U.S. DOE, Energy Renovations: Insulation (May 2012)
Cold-climate example: DOE’s 2012 guide describes closed-cell foam’s vapor control as “an advantage in cold climates”. Hot-dry example: “If you live in the hot-dry climate zone, you can insulate under the roof deck with fiberglass batts or netted cellulose insulation.” Mixed-climate example: “it may be better to have a vapor-open assembly in mixed climates”. Read these historical examples with the complete assembly design.
What should your batt or spray-foam bid specify?
A comparable batt or spray-foam bid identifies the material, cavity location, installed thickness, air-sealing work and vapor-control arrangement. The extension table’s fiberglass 3.2 and mineral-wool 3.1 R-values per inch illustrate why a bid saying only “batts” leaves the material ambiguous. Ask each contractor to price the same assembly. Sources read 9 November 2026.
Source: University of Maryland Extension, Home Energy: Insulation (updated July 2026)
For batts, name fiberglass or mineral wool, faced or unfaced, and the work to fit batts without compression. List separate sealing at air leaks: DOE’s 2012 guide calls batts “Not air-tight.”
For foam, name open-cell or closed-cell, installed depth and the vapor-control plan. DOE’s 2012 guide distinguishes closed-cell foam as a vapor retarder from open-cell foam, which is not a vapor retarder.
For application, identify the selected foam’s permitted lift thickness, cooling between passes, ventilation and re-occupancy instructions. EPA’s voluntary 2015 working-draft checklist calls for product-specific application instructions; its overheating warning is a reason to record those details in the bid.
When should you not use spray foam insulation?
Spray foam work should wait until the product-specific application and re-occupancy plan is clear. EPA’s voluntary 2015 working-draft checklist calls for manufacturer instructions on ventilation and re-occupancy and warns that overly thick lifts can overheat and char foam. The checklist supplies no universal return-home time for every product. Sources read 10 November 2026.
Source: EPA, Contractor Checklist: Guide to Safer Workplace Practices (working draft, 2015)
| Priority | Choose |
|---|---|
| open framing in attics, basements and crawl spaces | Batt insulation |
| hard-to-reach areas or irregular spaces | Spray foam |
What does attic insulation cost?
For attic insulation prices, see How much does attic insulation cost?
Get written bids
Sources for the facts on this page
- University of Maryland Extension, Home Energy: Insulation (updated July 2026), university extension, read 9 November 2026.
- U.S. DOE, Energy Renovations: Insulation (May 2012), government, read 9 November 2026.
- HUD, Residential Rehabilitation Inspection Guide, Appendix C (2000), government, read 9 November 2026.
- EPA, Contractor Checklist: Guide to Safer Workplace Practices (working draft, 2015), government, read 10 November 2026.
- Federal Trade Commission, 16 CFR 460.5(a), R-value tests, government, read 9 November 2026.
For your AI assistant
MCP connector · REST API · plain HTMLHand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.
- MCP connector URL
https://instabids.ai/api/agent/mcp - Agent API (OpenAPI)
https://instabids.ai/openapi.json - Start-request link
https://instabids.ai/intake?from=options-compare--batt-insulation-vs-spray-foam&utm_source=us&utm_medium=page&utm_campaign=options&page_type=options#job=batt%20or%20spray-foam%20insulation - Prompt for any AI, with your job
- ChatGPTOpens with the prompt
- ClaudeOpens with the prompt
- GrokOpens with the prompt
- GeminiCopies the prompt, then opens
Every page is plain HTML. Steps for every assistant: add to your assistant.