InstaBidsInstaBids
Skip to content
InstaBids
Menu
Use your AIStart my request

What types of spray foam are there?

Spray foam favors closed-cell for limited cavity clearance (Spray Polyurethane Foam Alliance, read 11 November 2026). Distinguish spray foam from expanding foam before choosing cavity insulation or gap sealant. Open-cell typically provides R3.6–R4.5 per inch, closed-cell R5.8–R6.9; roofing foam needs a protective covering.

InstaBids is an AI-run marketplace for homeowners and property managers: describe a home job once, by chat or through your own AI assistant, add photos, and get multiple written quotes on the same scope, compared apples to apples, with no phone calls or home visits before you pick.

  1. Describe it onceBy chat, or through your own AI assistant, and add photos.
  2. Post it and send itContractors bid in writing on that scope.
  3. Compare line by lineEvery quote is written against the same scope.
  4. You chooseContact details stay hidden until you pick and they confirm.

By . · Facts read 2026-11-09 to 2026-11-11

Spray foam choices: insulation, roofing and gap sealing

Spray foam choices: insulation, roofing and gap sealing
OptionsWhere it fitsPerformance or scope to specify
Open-cell insulationSoft, low-density cavity insulation; vapor control needs attention in colder climates.Typical R3.6–R4.5 per inch; air-barrier guidance about 3.5–5.5 inches.
Closed-cell insulationMedium-density insulation; consider when cavity clearance is limited.Typical R5.8–R6.9 per inch; air-barrier guidance about 1.5 inches.
High-density roofing foamAn exterior roof system with a protective coating, distinct from cavity foam.Approximately R-5.5–6.5 per inch; 1-inch minimum in the IBHS 2019 guide.
Two-component low-pressure kitFor smaller insulation applications and air sealing; delivery method is separate from cell structure.Name the product and intended insulation application in the bid.
One-component gap sealantCracks and gaps around openings rather than a substitute for whole-cavity insulation.EPA archived guidance describes gaps of 0.5–3 inches.

Where it fits: EPA archived product guide, SPFA and IBHS; read 11 November 2026.

Performance or scope to specify: SPFA typical guidance; IBHS roofing guide (2019); EPA archived guide; read 11 November 2026.

Keep service-life estimates in their original scope

Keep service-life estimates in their original scope
OptionsEvidence and limits
Cavity insulationHUD Appendix C (2000) lists “Lifetime” for generic insulation in foundations, roofs, ceilings, walls and floors; it does not rank open-cell against closed-cell.
Roofing systemSPFA conditions building-lifetime roof service on regular inspection and recoating every 5–20 years; this is not a fixed replacement date.

Evidence and limits: HUD 2000 generic insulation estimate (read 9 November 2026); SPFA roofing guidance (read 11 November 2026).

Download CSV · Download JSON

Does the spray foam assembly control moisture?

Cold-climate vapor control

SPFA says open-cell foam is moisture-permeable and may need a vapor retarder in colder climates; the captured sources do not supply a three-climate ranking.

Exterior roof application

IBHS says roof foam cannot be applied to wet or damp surfaces. Specify substrate condition and the product’s application instructions.

Which spray foam is the best?

Closed-cell spray foam suits limited-clearance insulation: SPFA gives a typical R5.8–R6.9 per inch, versus R3.6–R4.5 for open-cell. Exterior roofs need a separate high-density system with a protective coating. The assembly location and moisture-control design determine which foam belongs in the bid. Sources: SPFA and IBHS, read 11 November 2026.

Source: Spray Foam: RICOWI roof guide, read 2026-11-11

Source: FAQs: insulation and roofing guidance, read 2026-11-11

What's the difference between spray foam and expanding foam?

Expanding foam can mean a one-component gap sealant rather than insulation for an entire wall or attic. EPA’s archived product guide describes one-component foam for gaps of 0.5–3 inches, while two-component systems include larger insulation applications. State whether the job is gap sealing or cavity insulation. Source: EPA, read 11 November 2026.

Source: Spray Polyurethane Foam Product Types (archived), read 2026-11-11

Why are people removing spray foam insulation?

Spray foam shrinkage can call for repair; SPFA states, “Extensive shrinkage should be repaired.” That guidance does not establish that all spray foam needs removal. Exposed roofing foam has a different failure pattern: IBHS describes UV-related darkening and a friable surface. Sources: SPFA and IBHS, read 11 November 2026.

Source: Spray Foam: RICOWI roof guide, read 2026-11-11

Source: FAQs: insulation and roofing guidance, read 2026-11-11

Is open cell spray foam air permeable?

Open-cell spray foam can form an air-barrier material at sufficient thickness. SPFA gives about 3.5–5.5 inches for open-cell versus about 1.5 inches for closed-cell, and names ABAA document 07263 for the material specification. Ask for the selected product’s air-barrier thickness separately from its thermal target. Source: SPFA, read 11 November 2026.

Source: FAQs: insulation and roofing guidance, read 2026-11-11

Is open cell spray foam vapor permeable?

Open-cell spray foam “is moisture-permeable, and may require the installation of a vapor retarder in colder climates.” SPFA’s guidance separates this moisture-design question from air sealing: sufficient thickness for an air barrier does not settle vapor control. Ask for the vapor-control assembly in the scope. Source: SPFA, read 11 November 2026.

Source: FAQs: insulation and roofing guidance, read 2026-11-11

For installed pricing, use the attic-insulation cost guide; compare foam scope and performance here.

Attic insulation cost breakdown

What should a spray foam bid specify?

Sources

InstaBids assistantAI · builds your written scope with you

What spray foam insulation do you need done in your home? Describe it once to start your written scope.

Start from a common job
You choose who gets your number
Or send it from your own AIChatGPTClaudeGrokGeminiMore ways
InstaBids

For your AI assistant

MCP connector · REST API · plain HTML

Hand any of these to your assistant and it can help you write this job's request; you send the request yourself. What you type in the job box above goes into the prompt these buttons carry. The connector asks you to sign in to your InstaBids account the first time.

  • MCP connector URLhttps://instabids.ai/api/agent/mcp
  • Agent API (OpenAPI)https://instabids.ai/openapi.json
  • Start-request linkhttps://instabids.ai/intake?trade=insulation&from=options-spray-foam-insulation&utm_source=us&utm_medium=page&utm_campaign=options&page_type=options#job=spray%20foam%20insulation
Open it in your assistantAdd InstaBids as a connector

Every page is plain HTML. Steps for every assistant: add to your assistant.

Start my requestUse your AI